SolutionsCondition Monitoring Hardware:

Walk Around Support
Skip Navigation LinksITR Home > Solutions > Tools > Walk-Around Support

ITR stocks over 3000 part numbers of commonly used condition monitoring sensors, cabling, termination hardware, and mounting hardware. ITR application engineers work with customers to provide the most cost-effective solution while still accomplishing all monitoring and analysis objectives. Experience has shown that investing design work up front to determine the right solution pays long-term dividends. The lists below are examples of commonly used items for dedicated systems or walk-around programs.

Sensors

Product Code Description Select
Triaxial accelerometer, 100 mV/g (±5%), .3 to 12.5KHz, ±3db HA0001 Industrial, high precision and frequency response
Triaxial accelerometer, 100 mV/g (±5%), .4 to 6KHz, ±3db HA0004 Industrial, high precision and frequency
Biaxial accelerometer, 100 mV/g (±5%), .5 to 5 KHz, ±3db HA0005 Industrial, ideal for radial/axial measurement only
Single axis accelerometer 100mv/g (±5%), .2 to 15KHz, ±3db HA0007 Industrial, high precision, top exit
Single axis accelerometer 100mv/g (±5%), .2 to 10.5KHz, ±3db HA0008 Industrial, high precision, side exit
Single axis accelerometer 100mv/g (±10%), .2 to 8KHz, ±3db HA0009 Industrial, mid-precision, side exit
Single axis accelerometer 100mv/g (±10%), .5 to 10KHz, ±3db HA0024 Industrial, mid-precision, top exit
Velocity sensor, loop powered, 4-20ma output, 0-1 in/sec HA0028 180 to 60,000 CPM
Velocity sensor, loop powered 4-20ma output, 0-2 in/sec HA0035 180 to 60,000 CPM

Cables/Mounting

Product Code Description Select
Curved Surface Mangnet with tri-axis accel orienting pins installed HM0009 For all accelerometers
Accelerometer mounting pad, 1-3/8” dia, 1/4-28 hole HM0003 Industrial, high precision and frequency
For all accelerometers HM0006 One kit for every 6-8 mounting pads
Cable for triax/biax accels, 4cond 20awg shld .25OD CE0006 Usually requires fittings on at least one end
Cable for single axis accels, 2cond 20 awg shld .25OD CE0036 Usually requires fittings on at least one end
Connector, composite 4-pin socket/female, bayonet plug CE0058 For triaxial/biaxial accelerometers
Connector, composite 2-pin socket/female, Style MIL-C-5015 HC0102 For single axis accelerometers

Product Information Request Form
Name
Company
Address 1
Address 2
City
State/Province
Zip/Postal Code
Country
E-mail  
Phone